picture |
Details
|
|
The IS40W-15 is a fully regulated output voltage power supply. The output voltage is normally preset at the factory. Please consult Customer Services for your voltage requirements when ordering. | |
Note: | Universal AC input/ full range, With Approvals of UL, ETS/EMC/CE |
Stock Code
|
Description
|
DC Output Voltage
|
Current
|
Efficiency
|
897.084.12
|
IS 40W-15
|
15V
|
2.8A
|
76%
|
Specifications | |
AC Input Voltage Range | 85-264VAC (120~370VDC) |
Input Frequency | 47~63Hz |
Inrush Current | Cold Start, 20A/115V, 40A/230V |
Input Leakage Current | <0.7mA/230VAC |
Load Regulation | <0.5% |
Line Regulation (Full load) | < ±0.5% |
Output Voltage Adjustable Range | ±10% |
Output Over Voltage Protection | 115~150% |
Output Over Load Protection | 110~150% |
Withstand Voltage | I/P-O/P: 3.0KVAC/1min |
I/P-F/G: 1.5KVAC/1min | |
O/P-F/G: 0.5KVAC/1min | |
Rise, Hold Up Time | 50ms, 20ms @ Full Load (Tipical) |
Operating Temperature & Humidity | -10ºC~+50ºC, 20~93%RH (Non Condensing) |
Safety Standards | UL60950, EN60950 |
EMC Standards | EN55022 Class B, EN55024, EN61000-3-2,3 |
EN61000-4-2,3,4,5,6,8,11 | |
Cooling Method | Convection |
Dimensions | 129x98x40(mm) |
Weight | 0.6kg |
The power supply is factory preset at the customer specified output voltage.
|
|
Mains input is via a 3-pin plug and flex; output terminals for + and - connections are provided outside the case.
|
The power supply is not recommended for float charging batteries above 60AH capacity (at C/20 rate).
|
Installation
|
The power supply should be installed in a well ventilated area and not enclosed where excessive heat build up can occur. Do not install or mount above any hot air discharge/air-conditioner/radiator or similar equipment. Mounting outside or in a wet/damp environment is also not recommended. Keep fan intake/output vents well clear of any material likely to block them.
|
Batteries
|
The above power supply is not suitable for charging the battery. |